PDA

View Full Version : Vehicle platform question



aaronr
May 6th, 2012, 04:38 PM
Ok i have few questions about this section. So if i turn of the electronic throttle off it will convert over to cable throttle body? So if i do a system segment swap from a f-body into GMT800 and then change the vehicle platform GMT800 will looses everything from the system swap? What options do you get if you change the vehicle platform to Holden? Is there a list what of what Calibration you get with each platform?

http://i241.photobucket.com/albums/ff48/russell1978/Capture.jpg

aaronr
May 7th, 2012, 02:25 AM
Bump anybody?

joecar
May 7th, 2012, 05:20 AM
I believe that is not sufficient to swap the throttle mechanism... you would need to do a segment swap.

aaronr
May 7th, 2012, 06:06 AM
Joecar, can you answer rest of questions.

joecar
May 7th, 2012, 06:26 AM
Changing the platform (G1206) will not lose anything from the segment swap, and it won't add anything either... it just enables different features/abilities from what is already there.


I don't have a list of platform features... you would have to open different files from various platforms to see which features are present.

Taz
May 7th, 2012, 06:32 AM
So if i turn of the electronic throttle off it will convert over to cable throttle body?

No - the platform table is information only.


So if i do a system segment swap from a f-body into GMT800 and then change the vehicle platform GMT800 will looses everything from the system swap

No - see first answer.


What options do you get if you change the vehicle platform to Holden?

None - see first answer.


Is there a list what of what Calibration you get with each platform?

Not that I know of.


Regards,
Taz

aaronr
May 7th, 2012, 07:11 AM
Is there tunes that have the Holden platform in them?

joecar
May 7th, 2012, 08:27 AM
Holden Files (http://www.tunefiledepot.com/index.php?option=com_content&view=article&id=4&Itemid=3&Manufacturer=1&VehicleType=P&Stock=Y)