PDA

View Full Version : autocal and lly help



Drew04.5
May 9th, 2012, 11:17 PM
Ok i have neen trying dor days and cant get this autocal to full flash my lly it will read codes but when i try to flash it i get a failure to communicate code and if i try to go to the bbx and auto find the ecm it will only pick up the trans so i wiped everything off my auto cal and try to reload the stc and pic needed then passthrough flash with the lap top and it say license is not valid. And when i try to crank the truck i got nothin. Sorry for the long read please help i am stumped and so is my vendor

dansdieselp
May 9th, 2012, 11:58 PM
There currently is a glitch with the LLY trucks in the current release. Try installing a previous release until it is resolved.

Drew04.5
May 10th, 2012, 12:25 AM
Thanks i will give it a try tonight

Drew04.5
May 10th, 2012, 12:56 AM
Can you tell me what format to save the tunes in to flash them to a lly

ScarabEpic22
May 10th, 2012, 02:16 AM
All tunes need to be in the *.ctz format to flash with a V2 or AutoCal. That said, if you are an end user of an AutoCal, you cannot modify or resave the tune files your tuner sends you. If you do, you will be unable to flash them because the tuner's V2 serial number will not be embedded in the tunes anymore.