RR problem

[Harrismarine]

I did a base tune with my RR and then flashed the saved tune into the boats 411 pcm and had to increase the numbers in the VE table by around 30% to stop the motor running super lean, I compared the two tunes before I changed the VE and they are the same......put it back on the roadrunner and all is good, any Idea whats going on?:bash:

[joecar]

Are you viewing the VE in [%] units...? If so, is the displacement parameter different between the 2 tunes...?


Also, sanity check: are you sure you saved the file...?

[Harrismarine]

Hi Joecar, I have been back through it and if I put the roadrunner back on it runs fine with the tune (that I saved) in the RR, But flash that tune into the 411 and it runs lean

[joecar]

The tune that you flash into the 411, read it back and compare with what you flashed in.