LB7 Balance Rates all reading 0

[Mitco39]

I dont believe this to be an EFI Live issue as my edge insight would also read all 0's. I am curious as to if anyone else had this same issue while trying to read the balance rates on the LB7s? Just for kicks up updated the 01OS that was in the truck to the 02, but it didnt make a difference.


Thanks

Mitch

[THEFERMANATOR]

If the injectors are REALLY bad it can also go to 0 for the balance rates. I did a set here awhile back and they started bouncing between 0 and +/- 4 when it couldn't hold rail pressure. Look at your idle fuel rate and see what it is reading, also check the actual fuel pressure to see if it is close to desired.