PID for LMM to see torque?

[pavetim]

Is there a PID that you don't have to be on a dyno for that tells you how much torque the truck is putting out while logging? This is for my LMM and I have builds 206 and 197. And is there a PID that tells you if your pulling torque due to torque management. I know there are pids but i've used them before and says not supported, maybe it's different in the newest builds.

[Brian1]

Which ones are they that say not supported. Might be calculated PIDs requiring more than one PID needed to display a calculated PID. A calculated PID is a Formula of one or more PIDs with numbers to achevie the PID data. Example is the Allison Slip PID. the data is based on the 5th gear ratio if a 5 speed or 6th gear ratio if 6 speed. Any other gear the data will be incorrect.

Brian