Licensed ECM can be retune with another v2???

[400ss]

My truck (06 5.3 4L60E silverado) has a Mail Tuned ECM with EFILIVE,, and i just get the EFILIVE v2,, can i reflash the tune on this licensed ECM, without using my licenses??

How do i check is this ECU is licensed???

Or do i need to licensed it with my V2 to be able to reflash it??

[cindy@efilive]

Licenses are tied to the FlashScan device, they are not stored in the vehicle controller (ECM,PCM, TCM). If you are using a different FlashScan unit to tune a vehicle, you will need to license the controller to the new FlashScan irrespective of it being previously tuned and licensed to a different FlashScan device.

Cheers
Cindy

[minytrker]

The license are married to each V2. The same pcm could be licensed to multiple V2's. So basically you will have to license it to your V2.

[ScarabEpic22]

No, you will have to use one of your licenses to flash your PCM. The only way to not use a license would be to have the original tuner let you borrow his/her V2 (doubtful), or you purchase a stream license (not practical for 1 vehicle).

If it has been previously tuned, just make sure your tuner did not lock the PCM. If so, you'll have to have them unlock it, give you the key, or buy a new PCM.

[400ss]

thank you very much to everyone.. all is clear about that..

[Big Mike]

How about the opposite scenario, can more than one V2 be licensed to the same controller? I.e. if I had two V2's and wanted to use either one with the same controller, could both be licensed to it? I don't think I've ever read where this has been mentioned before.

[400ss]

How about the opposite scenario, can more than one V2 be licensed to the same controller? I.e. if I had two V2's and wanted to use either one with the same controller, could both be licensed to it? I don't think I've ever read where this has been mentioned before.


Hi,, someone just say it some replys above:


The license are married to each V2. The same pcm could be licensed to multiple V2's. So basically you will have to license it to your V2

take care =)

[ScarabEpic22]

How about the opposite scenario, can more than one V2 be licensed to the same controller? I.e. if I had two V2's and wanted to use either one with the same controller, could both be licensed to it? I don't think I've ever read where this has been mentioned before.


Hi,, someone just say it some replys above:


The license are married to each V2. The same pcm could be licensed to multiple V2's. So basically you will have to license it to your V2

take care =)

Yep, you can link a PCM to as many V2/ACs as you want, just have to pay the license fee for each V2/AC. Ive thought about linking my 08 TBSS to one of my ACs, but then Ill blow another $125 license. Not worth it when Ive got it licensed to my V2 already.