Lets talk start up idle flare [Archive]

Trippin

February 14th, 2006, 07:27 PM

Slapped down a quicky WOT tune on the dyno and am starting to work on the drivability:

2000 Vette
383 ci
M6
Ported heads
Fast/Nick Williams 90 drilled
Solid roller cam idles at 900 rpm with approx. 16inHg with 3.9% throttle opening warm
11:1 compression
MAF-less

ETC scaler =.0320

B4403 is stock for now.

Any suggestions on curing the start up idle flare?

Should I just run AutoVE tune, before I get too much farther?
I'd really like to cure this idle flare so I can drive it until the weekend :D

Dirk Diggler

February 14th, 2006, 08:33 PM

Set the ETC scaler back to stock and use the idle pids Ltit,stit, startup friction airflow and startup airfklow to dial in the respective tables

Trippin

February 14th, 2006, 10:01 PM

Should I do anything with IAC effective area?

Dirk Diggler

February 15th, 2006, 02:46 AM

Set it back to stock. My partner will hook ya up ;)

Black02SS

February 15th, 2006, 02:47 AM

LOL, Guy, I talked to the owner of the car last night and I'll send you a tune here later today. I have to get some sleep and then go to school but tell him I will have him something by this evening. You will need to use your cable for the inital flash because we are going to put a 2002 OS on it.

Trippin

February 15th, 2006, 04:21 AM

LOL, Guy, I talked to the owner of the car last night and I'll send you a tune here later today. I have to get some sleep and then go to school but tell him I will have him something by this evening. You will need to use your cable for the inital flash because we are going to put a 2002 OS on it.

:thankyou2: