When the EFI live support for 2013 Yukon 5.3, 6.0 L?

[hthy]

Hi dear,
When the efi live support for Yukon Tahoe 2013 5.3, 6.0 L?
If support What is the stream license group support?
Example:
E38, E67......
Thanks

[GMPX]

I suspect it will still be an E38, but I don't think these have hit the dealers yet so I can say for sure what they are using.
Either way, once we get a read from one sent in, it's probably a few days to get support for it if it's an E38.
Do you have one?

Cheers,
Ross

[hthy]

Thanks dear GMPX for reply
The PCM for 2013 Yukon sure same 10 11 12 PCM for Yukon
But is it suppurt with EFI E38?
Thanks again

[GMPX]

If it's the E38 then yes it will be supported no problem, I expect we will get some reads from the 2013 models next week as they reach the Chevy dealers, then I can tell you 100% yes.

[hthy]

Dear GMPX if you get the file send it to me please.
Thanks

[GMPX]

Do you have one there waiting to be tuned?

[hthy]

Thank you GMBX for intresting
I have more than 15 to tuned in the next month.

[GMPX]

no problem, well if you get one in and I haven't reposted in this thread to say we have a tune from one, read the vehicles and we'll get you sorted out ASAP.

[GMPX]

hthy, I have confirmation from a 2013 5.3L Tahoe that it is using an E38 OS we've already added support for, so as long as you have the latest software installed you will be right to go.

[hthy]

Thank you my brother for the good news
When can i receive the updated license from payment?

[GMPX]

When can i receive the updated license from payment?
I'm not sure what you means sorry, and I can appreciate English is probably not your main language.
If you just go to HERE (http://www.efilive.com/index.php?option=com_content&view=article&id=48&Itemid=133), and download that software update you will be able to tune those 2013 Tahoe's.
Regarding your PM, once you get one of the vehicle in your shop, read the ECM file out and send me a PM, I'll get you sorted out for the speed limiter.

Cheers,
Ross

[joecar]

hthy,

download and install V7 build 209 and V8 build 200 from the link in post #11 by GMPX;

then update the bootblock and firmware in your V2;

then using the V8 S&T software, program the BBx config into your V2.

[hthy]

Thanks GMBX & joecar