PDA

View Full Version : 06 duramax bbx help



rodder55
June 11th, 2012, 08:49 AM
I have spent past 6+ hours reading trying reading failing to set up bbx with my v2 tried new setting. Everything is up to date. I go select pids lbz then say lbz selected then I click display data and a screen comes up saying
Unsupported PID
Node:ECM
PID: MAIN1Q_M
Is not supported,
Please de-select it

Can some one please help me wrap my brain around this. Possible send me the PID selection list and the v2 setup. File Im very lost

rodder55
June 11th, 2012, 08:50 AM
i followed this
http://forum.efilive.com/showthread....51-BBL-PIDs-V2
and this
http://www.dieselplace.com/forum/sho...d.php?t=401770

still cant figure it out
here is the message coming up

http://www.youtube.com/watch?v=8mGPI9leH3g

rodder55
June 11th, 2012, 10:35 AM
quick update i have tried removing that specific pid and then it would just choose another to have a hissy fit with. im sure im probably missing something dumb

joecar
June 11th, 2012, 10:53 AM
What V8 build version...?

What V2 firmware version...?

Did you specify the correct ECM in the pidlist...?

rodder55
June 11th, 2012, 01:33 PM
What V8 build version...?

8.2.1 build 200
What V2 firmware version...?

2.07.32

Did you specify the correct ECM in the pidlist...?
and yes i used lbz ecm and the associated al6 trans controller

joecar
June 11th, 2012, 05:53 PM
Can you post your Options.txt file here...

rodder55
June 11th, 2012, 06:29 PM
13358

now when i go to put this on the controller i think this may be the step i get lost. do i use the tmp file correct

joecar
June 12th, 2012, 01:29 AM
No... open the Options.txt file and program that into V2...

but, first, are you using all those ECM's and TCM's...? If not, then from within the BBx window delete all the pidlists (Scan) and controllers (Tune) for any ECM/TCM other than yours.


Then when you have the pidlist and controllers chopped down, click Save (and save to Options.txt), click the down arrow next to Program and click Program All.

rodder55
June 12th, 2012, 05:31 PM
13374nope same crap what do you mean program v2 with the scan and tune app under bbx unsing my new chopped list
is there a guide to proper formatting ect. is there a proper file you can send me to put on my v2?i appreciate ur help and understanding

joecar
June 12th, 2012, 08:49 PM
You got an LBZ...? Ok, see this thread: http://forum.efilive.com/showthread.php?19563-PID-keep-showing-unsupported

After you extract and locate those files, start the V8 Scan & Tune (S&T) software, click the BBx button, click Open (specify your Options.txt), click the down arrow next to the Program button and then click Program All.