PDA

View Full Version : Standalone CMB849


cumminsDK
June 16th, 2012, 04:47 PM
Has anyone attempted to or successfully used an 06-07 5.9 oem ecm to run one of these engines on a stand?
2007 5.9
June 17th, 2012, 12:36 AM
I don't see why it won't work.

Flash a manual OS and disable all dtc that come up.
cumminsDK
June 17th, 2012, 03:13 AM
I was thinking the same thing until I looked at my first manual os yesterday and realized they have all the auto trans tables also. Not sure it even would matter. Should be as simple as hooking up appropriate power and ground, all necessary sensors, and can bus and a data link for tuning and it should run
anarchydiesel
June 17th, 2012, 09:15 AM
It should not be a problem other than without a speed signal it may think that it is in idle mode and give you some MM3 limiting. We have fought with this in our pro-street truck, and have been able to tune around it so far.
dansdieselp
June 18th, 2012, 12:06 AM
Yes. Same standalone we have for the pull trucks.
chance cobb
June 18th, 2012, 03:31 AM
Yes. Same standalone we have for the pull trucks.

is that just an 06 ecm ?
comnrailpwr
June 18th, 2012, 10:43 AM
any 06/07 5.9 ecm
chance cobb
June 18th, 2012, 02:48 PM
interested in knowing if you can make an 03 ecm work as the same as an o6 ecm in a race only truck ?
comnrailpwr
June 18th, 2012, 09:20 PM
Sure you can. It would be easier being there is already standalone harnesses out for 03-05
spooled05
June 19th, 2012, 06:54 AM
Im trying to do a bench flash and have all the wires connected to ecm properly and was wondering if any of yall could tell me what wires i need besides the 2 can wires from ecm and what places to put them in the diagnostic connector
bcbracing
January 12th, 2017, 02:56 AM
Im having the mm3 limiting issue on my 06 dragtruck that doesn't have a speed signal. Anybody have some insight on which way a guy should tune around it? Any help much appreciated Thanks!!
2007 5.9
January 12th, 2017, 07:42 AM
Im having the mm3 limiting issue on my 06 dragtruck that doesn't have a speed signal. Anybody have some insight on which way a guy should tune around it? Any help much appreciated Thanks!!

What value are you being limited to?
bcbracing
January 12th, 2017, 07:51 AM
126mm3 is the most I could pull out of it. Anytime before the speed signal quit working I could peg it at 145mm3
2007 5.9
January 12th, 2017, 08:02 AM
Yeah 120-130mm3 limit is normal from my experience. I just rescaled accordingly
bcbracing
January 12th, 2017, 08:04 AM
oh ok perfect, I will do that. Thank you!