PDA

View Full Version : Unable to Read 07 cummins ECM


hhrecovery
June 21st, 2012, 04:07 AM
I am 100% to date on all patches and firmware... When it trys to read it comes up. Script exited with code $0311: Mode no supported

Thanks.
comnrailpwr
June 21st, 2012, 06:20 AM
Are you selecting the proper ecm when your trying to read it? It could be a 5.9 or 6.7.
hhrecovery
June 21st, 2012, 07:34 AM
yes I sure am... I even let auto detect pick and it still won't read it..
IdahoRob
June 21st, 2012, 08:53 AM
5.9 or 6.7? I have both here as well as the updated software. I could test both to see if it is a software issue if needed.
hhrecovery
June 21st, 2012, 08:59 AM
it is a 5.9 Rob, I wasted about 1.5 hours of mine and one of your guys time trying to check everything out on my efilive... Please let me know what you find... This is Aaron @ Smokin' Guns Performance
IdahoRob
June 21st, 2012, 09:31 AM
I tested it on our 5.9 2007. auto detected fine and copied out fine. Try it on another truck if possible Aaron. This will tell you if it's a truck issue or something on your end.
GMPX
June 21st, 2012, 09:55 AM
If it's been tuned before there is every chance the ECM has been locked by the previous tuner. If you were trying to read an ECM locked by EFILive this is the error you will get, I believe a Smarty locked ECM will give the same error.
hhrecovery
June 21st, 2012, 10:07 AM
Truck has been programed by smarty but was removed before we tried to read it...
2007 5.9
June 21st, 2012, 11:05 AM
Is this the truck that I sent you a tune for a few weeks ago??
hhrecovery
June 21st, 2012, 11:07 AM
Differnt truck
2007 5.9
June 21st, 2012, 11:16 AM
Did it have the POD function??

I've never been able to read a ECM that had the pod function.
hhrecovery
June 21st, 2012, 11:20 AM
Yes it was runnin one of the pods
comnrailpwr
June 21st, 2012, 11:38 AM
I would get a dealer reflash
2007 5.9
June 21st, 2012, 11:47 AM
^^^^^^ agreed...dealer flash is the ONLY way to ensure a clean ECM.
GMPX
June 21st, 2012, 01:29 PM
Truck has been programed by smarty but was removed before we tried to read it...
Unfortunately returned to stock doesn't mean swat, they don't return the ECM to true factory stock, not even close.


I would get a dealer reflash
Yep, that's your best bet.
hhrecovery
June 21st, 2012, 10:55 PM
would one of the ECM recovery work???
dansdieselp
June 23rd, 2012, 07:31 AM
Try flashing in a stock tune off tunefiledepot.com.
Tan70
June 24th, 2012, 05:45 PM
Yup i had the same issue with the pod function... Got a clean file and it worked. good luck