PDA

View Full Version : Timing, Boost Adjust D6270 & D6273


kaiserbailey
July 6th, 2012, 02:19 PM
Seems like this map is pulling a lot of timing. Do you guys even use this map, or do you just zero it out?
icemanjc1
July 7th, 2012, 03:50 PM
I've stared at those tables more times than I'd like to admit, yet haven't tried changing them. For the reason I can't see where it's pulling 10 degrees or more at 2000 rpm or above. I'm waiting for our "new and improved" data logging operating system to come out, maybe we'll see what comes out of the woodwork with that...
06redram
July 7th, 2012, 05:02 PM
The table does word and makes a difference for control and boost
2006Cummins
July 9th, 2012, 12:03 PM
The table does word and makes a difference for control and boost

Any hints?
kaiserbailey
July 10th, 2012, 07:29 AM
The table does word and makes a difference for control and boost

do you keep it as is, or modify it? :thankyou2:
06redram
July 10th, 2012, 09:44 AM
Log you tune then play your tune back and open the boost table, look in see what your log is showing in boost table. Start there, then you can see how much fuel you need in that boost area of the map.

Help you out 14.5 is idle area for most of our trucks. Basically 14 is 0 psi on the mechanical gauge if u have one on ur truck
kaiserbailey
July 10th, 2012, 11:31 AM
Log you tune then play your tune back and open the boost table, look in see what your log is showing in boost table. Start there, then you can see how much fuel you need in that boost area of the map.

Help you out 14.5 is idle area for most of our trucks. Basically 14 is 0 psi on the mechanical gauge if u have one on ur truck

Are you talking about the fuel limiter or timing adjust?
06redram
July 10th, 2012, 12:55 PM
F0502 Fuel Limiter, Boost
kaiserbailey
July 10th, 2012, 12:57 PM
F0502 Fuel Limiter, Boost

Ah, I was talking about the timing adjust that is based on boost.
06redram
July 10th, 2012, 01:02 PM
Sorry: my bag
06redram
July 10th, 2012, 01:08 PM
No need to touch that map D6270. You can try and change to get whatever results you a looking. If you do make any changes to this map do a little at a time and log. Report your findings
kaiserbailey
July 10th, 2012, 01:15 PM
Wish I could, but I'm in an 05. I guess I should make a signature.

Have you ever modified that table?
06redram
July 10th, 2012, 01:23 PM
Starting to do that right now. Will test tomorrow
kaiserbailey
July 10th, 2012, 01:24 PM
Thanks a bunch, can't wait to hear the results.
2006Cummins
July 10th, 2012, 02:38 PM
Set the entire 6270 table to -5 and didn't see a difference...
kaiserbailey
July 10th, 2012, 02:51 PM
Set the entire 6270 table to -5 and didn't see a difference...

No difference logged, or SOTP?
2006Cummins
July 10th, 2012, 03:06 PM
SOTP and smoke showed no noticeable change. Made a long log and after a quick review didn't see obvious changes.
icemanjc1
July 10th, 2012, 04:51 PM
Wish I could, but I'm in an 05. I guess I should make a signature.

Have you ever modified that table?

It's good to see guys doing their homework before hand. Good deal Bill.
kaiserbailey
July 11th, 2012, 02:42 PM
It's good to see guys doing their homework before hand. Good deal Bill.

I'm gonna be ready when it comes out! :grd:

Not really, I'll have to figure out logging and PIDs, and figuring out how to interpret all that.:throw: