gpr
July 20th, 2012, 11:08 AM
I finally got my lc1 installed, efi live hooked up and the car ready to run and tune. I went through the calc.vet tutorial (which is awesome by the way). However i have one problem. In my maps i am getting all zero's, so logging is really doing me no good. I have attached my tune and log file, if someone could look at it and help me out I'd greatly appreciate it!
btw, the car is a 2002 camaro with headers and full exhaust. then the engine has a cam in it. I have no idea on the specs as it was there when i bought it. I'm trying to get it to idle better. Used some of the tips in the idle tutorial in this forum. One thing is the car didn't start very well when it was hot, so i increased the VE while cranking table by 10% as it was stock before. it seems to have helped. My problem is the car wants to idle high when in gear. When i let off the brake in gear the car takes off and is idling at ~900 rpms, what can i do to help this or correct this issue. 1354313544
btw, the car is a 2002 camaro with headers and full exhaust. then the engine has a cam in it. I have no idea on the specs as it was there when i bought it. I'm trying to get it to idle better. Used some of the tips in the idle tutorial in this forum. One thing is the car didn't start very well when it was hot, so i increased the VE while cranking table by 10% as it was stock before. it seems to have helped. My problem is the car wants to idle high when in gear. When i let off the brake in gear the car takes off and is idling at ~900 rpms, what can i do to help this or correct this issue. 1354313544