PDA

View Full Version : StarLite Diesel Basic book question



dmtcm
July 24th, 2012, 06:38 AM
I received my books from StarLite Diesel and I have a problem with an early section of the 'Basic' book. Page 25 has a part of smoothing the table out after making a change in the fuel injector pulse width. I figured that out easy enough but the problem is trying to duplicate the numbers they have on line 100 after using the horizontal fill button. Mine are not coming out the same. I've tried several ways to achieve this but to no avail. :wallbash:
I also did not receive the cd with the books. They are sending the cd for me and for now I am using a stock LLY file that I have to follow the book. I wouldn't think this is the problem? I changed the value for the 160 MPa @ 100 TPS to the value they stated but when I highlight the blocks needed to smooth the table, my numbers don't come out even close to theirs. Anyone have any ideas?

dmtcm
July 24th, 2012, 12:09 PM
I called StarLite Diesel. There was a problem with the book and they are correcting the diagram.