View Full Version : Need hypertech/efi cant do
JST
July 28th, 2012, 04:50 AM
How do you set the speed on this truck,I have reset the ECM/TCM no help,he has 285/75/16 and is 5 mph off ? Have EFI ?
__________________
tokymon
July 28th, 2012, 07:21 AM
messure the accual tire size (height) and enter that
285 should equall about 33 but have seen some as low as 31.5 inch tall
JST
July 28th, 2012, 07:46 AM
Put in 37" still 5 mph off ?
Taz
July 28th, 2012, 10:43 AM
How do you set the speed on this truck,I have reset the ECM/TCM no help,he has 285/75/16 and is 5 mph off ? Have EFI ?
The speedometer is 5 MPH off at what speed - 50 , 100, etc. ? Speedometer error is a percentage not a constant.
Post the original (not modified) ECM and TCM tunes, as well the tire manufacturer and model line (i.e. Goodyear manufacturer - RSA model tire - etc.) for the 285/75-16 tires.
Myself or another Forum member will take a look at it for you ..
Regards,
Taz
JST
July 28th, 2012, 11:20 AM
5 mph at 70 and 3 mph at 35
JST
July 28th, 2012, 11:32 AM
13614 13615 Had 245/75/16 and now 285/75/16
Taz
July 28th, 2012, 12:11 PM
The ECM tune you posted has had the Speedometer parameters altered - need an unaltered stock version. Also need the tire manufacturer and model for the new 285/75-16 tires - to then look up precise tire data. Once I have these pieces to the puzzle, I will try and help out.
Getting late here - probably won't check the Forum again until Monday.
Regards,
Taz
JST
July 29th, 2012, 02:24 AM
BFG tires,I have tuned 126 trucks to date and set the speedo on 80 % of the trucks,I check it with my GPS after setting it,if you look on the forums a lot of trucks can not get the speedo set with EFI (newer gas trucks) I did reset the H0136 from 370 to 333 no help,2 gas trucks in the area had a tech 2 set it after thay gave up with EFI.
Rhino79
July 29th, 2012, 07:19 AM
Try these.
JST
August 1st, 2012, 01:28 AM
Try these.
Thank you,let you know
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.