HELP! Flashscan V2 stuck with orange flashing LEDs.

[xtremecoupe]

I was in the process of updating the Boot Block/Firmware of my V2 via the EFILive Control Panel and around 50% of the Firmware "Programming" portion of the update, my laptop crashed.

Now my V2 is stuck with two flashing orange LEDs and NO display. After re-booting my laptop and opening the EFILive Control Panel, it says "Firmware version is OK" so I do not have the option to attempt a Firmware flash.

Is there a way to manually force a Firmware Update without using the Control Panel??? Any other suggestions???

Thanks in advance.

[joecar]

When the two amber LEDs flash in altermnation like that, start the V8 EFILive Explorer software, goto the Firmware tab and flash in the firmware...

your currently installed V8 software should be build 203, which means your bootblock should be 2.07.04 and your firmware will be 2.07.35.

[xtremecoupe]

When the two amber LEDs flash in altermnation like that, start the V8 EFILive Explorer software, goto the Firmware tab and flash in the firmware...

your currently installed V8 software should be build 203, which means your bootblock should be 2.07.04 and your firmware will be 2.07.35.

That fixed the issue!

Thank you for the help!