View Full Version : Main VE tables in %
EagleMark
August 26th, 2012, 03:19 AM
Since I am used to working the VE tables in percent (%) I used the Properties, Display to view them that way. But nothing changes? Yes I closed the file and reopened, even closed the program. It reflects the change in Properties, but not in the VE table. Still shows Grams*Kelvin/kPa.
EDIT: This is for 98-00 Vortec. I just tried a sample for LS engine and it works?
joecar
August 26th, 2012, 02:20 PM
Can you post screenshots of Edit->Properties and of the VE table...
If you're used to VE in % it is not much more of a leap to view it in g*K/kPa... :)
ScarabEpic22
August 26th, 2012, 02:29 PM
You can only view it in %, same thing with the P10 tables.
EagleMark
August 27th, 2012, 12:41 AM
You can only view it in %, same thing with the P10 tables. I think you mean Grams*Kelvin/kPa?
13819
Taz
August 27th, 2012, 12:47 AM
The screen shot you posted is merely your default settings. These settings are applied only if supported by the OS you are working with. Open any E38 / E67 tune and the VE will not be displayed as a percent - as this is not supported.
Regards,
Taz
ScarabEpic22
August 27th, 2012, 05:01 AM
I think you mean Grams*Kelvin/kPa?
13819
Ah my bad, I havent worked with the Vortec that much. I do remember that I couldnt change the default display units just like the P10, the P10 is locked in % (which is tricky because it uses a weird hybrid SD/alpha-n fueling).
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.