Truck wont idle during open loop speed density

[mtnman]

I've flashed the SDAutoTune tune into my PCM and the truck won't continue to run at idle without applying pressure to the gas pedal. Do I need to bump up the values in a table other than the VE table? It seems that the problem is related to colder temps. I don't remember having the problem in warmer weather.

[ringram]

You might need to tune your idle air flow. the MAF might have been patching up the problem. There is some info and pids etc on here.

Do a search for "idle transition" tuning.

[TAQuickness]

In addition to ringram comments, what AFR is your WB reporting at idle? LSx's don't like to idle under extreme rich conditions.