not so sure i was sent the correct v2 flash scan...

[subiracer06]

hello there,

i just received my v2 flash scan for my 06 cummins 5.9 and cant get it to call up my factory calibrations. i am trying to find the correct PCM name on the drop down list. all i see is GM items.... do i not have the correct software downloaded?

here is the list of what i show:

e40 geniV ECM
E38 GEN IV; V6 ECM
E67 GEN IV V8; L4 ECM
E78 V8; L4 ECM
E39 V6; L4 SIDI ECM
E37 V6 L4 ECM
E83 L4 ECM
E40 GEN IV ECM
LS1A GEN III 97-98 PCM
LS1B GEN III 99-08 PCM
04-07 LM7 V8 HYBRID
E54 LB7 DURAMAX ECM
E60 LLY DURAMAX ECM
E35A LBZ DURAMAX ECM
E35B LMM DURAMAX ECM
P10 INLINE 6 PCM
P12 ATLAS ENGINE I4; I5; 56; PCM
L31 VORTEC 98-00 PCM
P08 1998-02 4 CYLINDER PCM
P11 2002+ 4 CYLINDER PCM
T42 4SPD TCM
T43 6SPD TCM
AL5 ALLISON 5 SPEED
AL40 ALLISON 6 SPEED
AL50 ALLISON 2009+ 6 SPEED TCM

none of these work on my truck and i am at a stand still. my tuner wants me to send him a copy of my stock tune to look at before i go in.

which if any do i select for my 06 cummins? and do i have the correct SW installed?

thanks in advance

[cindy@efilive]

There are 2 different sorts of software with EFILive. It appears you are using our V7 software, which you will need for editing Cummins files, but to read and flash you need to use our V8 software. V8 software can be downloaded from here http://www.efilive.com/index.php?option=com_content&view=article&id=48&Itemid=133

Once installed, open the V8 Scan and Tune, and you'll find the following controllers under the Tune Icon

If this is your first experience with EFILive and a Cummins vehicle, you may find the Cummins Quick start guide useful. To access this guide click on your windows start menu and navigate through Program Files>EFILive>V8>Documents and you'll find the PDF document there.

Cheers
Cindy

[subiracer06]

There are 2 different sorts of software with EFILive. It appears you are using our V7 software, which you will need for editing Cummins files, but to read and flash you need to use our V8 software. V8 software can be downloaded from here http://www.efilive.com/index.php?option=com_content&view=article&id=48&Itemid=133

Once installed, open the V8 Scan and Tune, and you'll find the following controllers under the Tune Icon

If this is your first experience with EFILive and a Cummins vehicle, you may find the Cummins Quick start guide useful. To access this guide click on your windows start menu and navigate through Program Files>EFILive>V8>Documents and you'll find the PDF document there.

Cheers
Cindy


Hi Cindy,

thank you for the quick reply. yes i am very new to EFI and i have gone through the quick start and followed it to the T. i will study it again and try out V8.

thanks so much for the support

- Jimmy

[racerx004]

Look at the box your V2 was shipped in. It should have a sticker on it that says it is for a cummins.
Mine says FS2-GM, which I'm guessing means it's for a chevy or GM vehicle. if it says this you may want to contact your distributor and check to make sure they sent you the right V2.