Scanning error

[nonnieselman]

Just did the latest update the other day and wished i didnt.

Havent had a scan tool problem in forever.

Now i see this after i connect and attempt to watch live data or record.

http://img.photobucket.com/albums/v459/nonnieselman/866CCCE1-94EF-4136-8E97-E48636FC0DFE-771-000000C7CBFC8F28-1.jpg



Nothin like sittin on the side of the road for an hour tryin to get it to log.

Finally figured out if i unplug the wideband, 0-5V, it doesnt give the error. Gonna try it again when i get off work to see what happens.

Whats the deal?

[joecar]

Jonathan,

Do you have a V2...? If so see post #1 here: Setting-up-a-FSV2-from-scratch (http://forum.efilive.com/showthread.php?20699-Setting-up-a-FSV2-from-scratch)

Do you use serial comm for the wideband...? If so, then in V8 S&T on Devices page, uncheck Automatically Log All Analog Pids.

[joecar]

more info:


...

if you're not using the analog interface, start V8 S&T, goto F6: Devices, goto F6: Logging, and uncheck Automatically select ALL external analog pids;

then Save to file (Settings.dat) and Program to V2.

[nonnieselman]

Thanks a bunch joecar!!!

Yes V2.

Im loggin LC1 with the lil orange connector. But do plan on doin serial soon. Have the cable under my back seat haha.


Ill give it a shot and see what happens.

Thanks again!

[joecar]

Also see here: Scan-Tool-Error (http://forum.efilive.com/showthread.php?20725-Scan-Tool-Error&p=178644&highlight=#post178644)

[nonnieselman]

Thanks.

im still getting the error after doing your post #2 and #3.. But i can unplug the AD input and it starts just fine.. plug in the AD and i get my AFR to log..

It gets quite aggravating having to unplug it to start logging, then plug it in once it starts.. haha so when is the new update coming out???

[joecar]

Paul is working on it.

[nonnieselman]

Sounds good. Im extending the wideband wires tomorrow so it easier to get to.