Trying to scan SAE.RPM and not able to connect to the car.

[turbo-civic-si]

When ever i add in SAE.RPM i get this error and i cant connect to the car. I have been struggling with this for a week. I have updated the scan tool and I went through the setup. I installed a Road Runner in the car this year not sure if the problem is related to that but i never remember having any problems last year before the software update / scan tool update / roadrunner install. Any ideas???

car is a 02 ZO6


Thanks for all help...


error report generated by EFILive at 18:40:27 on Oct 07, 2012

Error code: ERR_RESPONSE/5
Response $03: .

EFILive Version: 7.5.7 (Build 211)

Platform: Windows NT
Version: 6.1 (build 7601)
Processor type: Pentium 2394MHz

Directories
Temporary Cache: C:\Users\Rich\Documents\EFILive\V7.5\Temporary cache
Logged Data: C:\Users\Rich\Documents\EFILive\V7.5\Logged data
Customers: C:\Users\Rich\Documents\EFILive\V7.5\Customers
Configuration: C:\Program Files (x86)\EFILive\V7.5\Configuration
Exported Data: C:\Users\Rich\Documents\EFILive\V7.5\Exported data
Images: C:\Users\Rich\Documents\EFILive\V7.5\Images
Sounds: C:\Users\Rich\Documents\EFILive\V7.5\Sounds
Maps: C:\Users\Rich\Documents\EFILive\V7.5\Maps
Pids: C:\Users\Rich\Documents\EFILive\V7.5\PIDs
Virtual Dash: C:\Users\Rich\Documents\EFILive\V7.5\VDash
Print Reports: C:\Users\Rich\Documents\EFILive\V7.5\Print reports
Bug Reports: C:\Users\Rich\Documents\EFILive\V7.5\Bug reports

Connected: No
Com port: 0
Com setup: EFILive FlashScan V2.5: USB
Requested baud rate: 115200

Cable id: 7
Cable code: FlashScan V2
Cable desc: EFILive FlashScan V2
Cable version: 2.7.35
Cable Firmware date: 20120622
Cable model: FSV2
Cable Serial number: 003765873628

Protocols: 0
Protocol list:

Auto connect: No
Scan OBDII info: No

Error retries: 1
Retry delay: 10
Message throttle: 0

Most recently used VIN: 1G1YY12S625xxxxxx (Note: 1)

PCM information
Hardware Number: 9386530
Calibration ID: 9391431
Serial Number: 1EB1Y30N1239
Operating System: 12593358
Engine Calibration: 9358673
Engine Diagnostics: 9358964
Transmission Calibration: 9358324
Transmission Diagnostics: 16264443
Fuel System: 16264703
System: 9373566
Speedometer: 9362158
Operating System BCC: DCPU
Stream-Slow scan mode: Supported
Stream-Fast scan mode: Supported
Maximum dynamic packets: 16

Detected modules:
$10="Powertrain Control Module (PCM)"
$28="Traction Control System (TCS) or Electronic Brake Control Module (EBCM)"
$40="Body Control Module (BCM) or Dash Integration Module (DIM)"
$58="Inflatable Restraint Sensing and Diagnostic Module (SDM)"
$60="Instrument Panel Cluster (IPC)"
$99="HVAC Control Module"
$A0="Driver Door Module (DDM)"
$A1="Front Passenger Door Module (FPDM)"
$A6="Driver Seat Module (DSM)"
$B0="Remote Control Door Lock Receiver (RCDLR) or Remote Function Actuation (RFA)"

Selected parameters:
CALC.AFR_PLX1=1,4216
CALC.BEN_PLX1=1,4290
EXT.AD1=1,4423
GM.AFR=1,4500
GM.MAFFREQ=1,4826
SAE.MAP=1,5250
SAE.RPM=1,5271

[joecar]

See post #3 here: Scanning-error




(http://forum.efilive.com/showthread.php?20733-Scanning-error)

[joecar]

Also see here: Scan-Tool-Error (http://forum.efilive.com/showthread.php?20725-Scan-Tool-Error)

[turbo-civic-si]

Got it to work. Entered my vin.. It really could not be that easy... Could it?

[turbo-civic-si]

I did what you said. Forgot the wideband was not wired in last year also.. Thanks for the really fast reply.