PDA

View Full Version : bad BBx log file



restless@westnet.com.au
October 24th, 2012, 05:03 PM
14083
bugger i just drove 40k and did a log this is how it came out is it corrupt ? or have i got some setting wrong ,or was the log to long about 30min

data # are way out to like rpm 68,000
water temp 256 c. ect
how do i post a log file ?


I JUST went and did another 5min one and its the same whats wrong ? i have re configured it as well
all the old log files play back no problem ?
thanks

joecar
October 25th, 2012, 05:07 AM
See these:


What-s-wrong-with-BBL-to-cause-this (http://forum.efilive.com/showthread.php?16807-What-s-wrong-with-BBL-to-cause-this)
Why-does-this-happen-alot-log-reading-prob (http://forum.efilive.com/showthread.php?12679-why-does-this-happen-alot-log-reading-prob)
Beta-Releases-and-Log-Files-Full-Of-Notes (http://forum.efilive.com/showthread.php?7919-Beta-Releases-and-Log-Files-Full-Of-Notes)
Strange-log-file-problem (http://forum.efilive.com/showthread.php?9409-Strange-log-file-problem)


11390

restless@westnet.com.au
October 25th, 2012, 02:04 PM
OK i have borrowed a friends v2 and laptop

to see if the log works on another PC (no its still corrupt )

i transferred the log to his v2 using my PC still corrupt

i then removed the TCM pids i put in yesterday before i did the log and did a small log just idling in the shed IT WORKS fine so it must be something to do with the TCM T43 PIDS i loaded ? (dont know witch one )
any reason for this ? if you give me an email adress i can forward the log or tell me how to post it here

thanks

joecar
October 25th, 2012, 02:23 PM
Remove all the TCM pids... and then add them back one at a time until you find the one(s) that don't play.

joecar
October 25th, 2012, 02:25 PM
For posting log/tune files, see post #22 here: Help-with-CalcVE-Tuning-Filter (http://forum.efilive.com/showthread.php?20711-Help-with-CalcVE-Tuning-Filter)

restless@westnet.com.au
October 25th, 2012, 06:43 PM
Remove all the TCM pids... and then add them back one at a time until you find the one(s) that don't play.

yer i will but not this weekend LOL

restless@westnet.com.au
October 26th, 2012, 01:36 PM
hi joe
just did a log of the trans arond town
does the TTC only come on with very little throttle
what sort of presure limit is normal ?

14091

joecar
October 28th, 2012, 12:00 PM
Yes, the TCC is applied at low throttle when vehicle speed is relatively low... check the TCC apply/release tables.

restless@westnet.com.au
October 28th, 2012, 12:12 PM
hi Joe
OK ill check it out
can you tell me witch table to look at to stop it kicking down from 6Th to 3 rd at WOT (very annoying and dangerous and not good for the box when over taking on the highway with 1000 + NM TRQENG )
is it WOT > SHIFT SPEEDS ?
i just don't see a parameter saying 6>3 only 4>3 etc
so do you have to work your way down from 6th to 3 third
thanks bob

joecar
October 28th, 2012, 12:51 PM
Hey Bob,

I'm not sure about the 6L80/90... I'll have to take a look at the tables... you might have to edit the shift tables to maintain a gear longer (vs easily downshifting).


Edit: name corrected.

Dieselman
October 28th, 2012, 07:21 PM
Are you still running the stock Tranny tune Bob ??

restless@westnet.com.au
October 28th, 2012, 08:22 PM
no the tyranny has had been tuned since it was nearly new (08 ) it is unopened though except for oil and filter changes
i'm just playing round with the oem tune now that i have retired and am board , and im trying to learn how it all works
i'm just trying to firm up the shifts a bit more at low rpm ,and stop it from down shifting from 6Th at 100 kmh to 3rd at wot thats a bit scary when over taking with the amount of torque it makes
i have uped the torque model table 15% but it dident do much at low TPS ? and i changed the the 4>3 shift speed from 114 kmh to 75 kmh to see if that helps with the down shift
cheers bob

joecar
October 29th, 2012, 04:47 AM
Hey Bob, sorry I spelled your name wrong (fat fingured typing :doh:)