PDA

View Full Version : updated firmware and bootblock and now it doesnt work



fraiolib
November 1st, 2012, 05:59 AM
just today i downloaded efi live explorer onto a different computer that ive been using since ive had my autocal, it made me update to firmware 2.07.35 and bootblock 2.07.04 and now when im in efi live explorer and try to put files onto the autocal from my computer it tells me "THIS FILE IS NOT SUPPORTED BY FLASH SCAN/AUTOCAL BLACK BOX FLASHING. ONLY *.CTZ FILES CAN BE USED WITH BBF."

how do i fix this

joecar
November 1st, 2012, 06:40 AM
Use V8 S&T software to convert your .tun and .ctd files to .ctz.

fraiolib
November 1st, 2012, 06:43 AM
Use V8 S&T software to convert your .tun and .ctd files to .ctz.

how do i do this? what is V8. and S&T? im not very handy with this thing.

joecar
November 1st, 2012, 06:49 AM
Did you download/install V8 software from www.efilive.com...? (http://www.efilive.com...?)

( you must have, otherwise how did you update firmware/bootblock )


After you start the V8 Scan&Tune software, you will see a button called "Tools".

fraiolib
November 1st, 2012, 07:12 AM
ok got it i think. thanks

fraiolib
November 1st, 2012, 07:16 AM
nope didnt work. now im getting error 050B

fraiolib
November 1st, 2012, 08:51 AM
when im in V8 and in bbx it doesnt give me any options to select, all the boxes to check say unused.

cindy@efilive
November 1st, 2012, 09:39 AM
nope didnt work. now im getting error 050B

Right below the V8 software download links on our web page you'll find the following text and instructions

Cheers
Cindy

After updating the FlashScan or AutoCal firmware you must also update all configuration files that have been previously installed on your FlashScan or AutoCal devices. To do that, start the V8 software, select the F5: BBx option, click on [Read] to read the current configuration from the attached device, then click [Program] to update the configuration files for the attached device. Failing to update the configuration files will most likely result in a $050B "Script file not supported by current firmware version" error.

fraiolib
November 1st, 2012, 09:53 AM
Right below the V8 software download links on our web page you'll find the following text and instructions

Cheers
Cindy

After updating the FlashScan or AutoCal firmware you must also update all configuration files that have been previously installed on your FlashScan or AutoCal devices. To do that, start the V8 software, select the F5: BBx option, click on [Read] to read the current configuration from the attached device, then click [Program] to update the configuration files for the attached device. Failing to update the configuration files will most likely result in a $050B "Script file not supported by current firmware version" error.

yup tried that. still no luck

Tordne
November 1st, 2012, 05:45 PM
Did you try clicking on the little arrow next to the [Program] button and select the Format Config Filesystem?

One thing to point out is that being an AutoCal issue you really should be seeking support from your Tuner (provider of the AutoCal). They may be using a specific software version (and therefore script versions) and deviating from their supported configuration may cause you issues with supportability. Please see this article (http://support.efilive.com/kb_article.php?ref=6785-TGKL-7770) for more details on AutoCal support.