AutoVE setup question for serial instead of analog

[rumblebox]

i set up the scan tool exactly like the AutoVE tutorial says, except instead of using "base efficiency numerator", i use "external wideband"?

[joecar]

Use the pid CALC.WO2BEN

it is defined in the calc_pids.txt file located in post #1 of this thread: A-New-Twist-on-CALC-VE-Table-Computing-the-Entire-VE-Table (http://forum.efilive.com/showthread.php?15236-A-New-Twist-on-CALC-VE-Table-Computing-the-Entire-VE-Table)


Also, do not set your B3618 PE table to stoich (EQR 1.00).