Ls1 Logging error report

[Tre-Cool]

why with a fresh install using a stock pid for ls1 do i get an error report when trying to record or monitor real time data.

using factory pid list - autove-plx etc. press record = Error code: ERR_RESPONSE/5

Response $03: .

running latest software and firmware on new v2 controller.

if i do a shift-f2 to check pid support it passes fine.

it's starting to shit me. every time i try and log an ls1 it does this, i often have to go through the list to find the dodgy pid unselect, start logging, then add it in.


agghhhhh

[Tre-Cool]

Anything to do with rpm seems to have issues

[Blacky]

There is an issue with the pass-thru V7.5 scan tool that causes that error to occur due to incorrectly handling external PID data from A/D inputs when nothing is connected to the A/d inputs.
Make sure you deselect all external PIDs if you don't have any A/D inputs hooked up.

It is fixed in the next update which is due out before Christmas.

Regards
Paul

[Tre-Cool]

I'm using ad1 from a plx so that would explain it

[Tre-Cool]

Any chance of getting the fix before hand. I cannot get it to work with or without anything plugged in to the ad ports. I even deselected ad in the scanner and still get the error.