PDA

View Full Version : Not able to scan with my V2



jaminish
December 15th, 2012, 08:27 AM
I am not able to scan or even connect to my V2, so no PID's or scanning, my software and firmware are all up to date but sometimes it says interface cable is not connected but when it does find it, it tells me togo get efi live HIPA and install the latest firmware and software which I have already done, so what can I do??

joecar
December 15th, 2012, 01:57 PM
What is your V2 firmware version...?

Are you trying to connect using V7 or V8 software...?

Did this just suddenly happen, or did you recently update V7/V8 software...?

Post a screenshot.

jaminish
December 15th, 2012, 02:13 PM
Everything is up to date, I made sure that it was checking my firmware and updates and everything said it was up to date, I try using the v7 cause v8 is not available, I have v8 downloaded and installed but it doesn't allow me to use it or the tuning on v8, on v7 but it will not let me scan with either and this has been going on for awhile, I just finally went to the forum to find out.

joecar
December 15th, 2012, 02:21 PM
Ok, what is your V2 firmware version...?

jaminish
December 15th, 2012, 02:36 PM
2.07.35

joecar
December 15th, 2012, 02:42 PM
Did you program the BBx conofig into your V2 (by doing Program All from the V8 BBx window)...?

joecar
December 15th, 2012, 02:43 PM
Why is V8 not available (it should be able to be started after you installed it)...?

jaminish
December 15th, 2012, 02:46 PM
Thats what I am trying to do actually right now but it says space required 108% with me only having E54 and AL5...

jaminish
December 15th, 2012, 03:02 PM
Okay i got the bbx done now, it was selected on many different controllers making me go to 108%