PDA

View Full Version : Need Help Please: Script exited with code $0533: No VIN-license slots available.


paint94979
December 28th, 2012, 10:48 AM
I purchased a license for my V2 an hour ago, I licensed the truck (2003 LB7 Duramax) via the V8 licensing option... It said that the VIN had been licensed, so I proceeded to do a full flash using the V8 software and was then given this error: Script exited with code $0533: No VIN-license slots available. Can someone help please
joecar
December 28th, 2012, 05:03 PM
What V8 build version do you have...?

What V2 firmware version...?

Did you program all of the BBx config files...?
paint94979
December 28th, 2012, 05:20 PM
What V8 build version do you have...?

What V2 firmware version...?

Did you program all of the BBx config files...?

Everything is current I tuned a Cummins last night without one single issue
joecar
December 28th, 2012, 05:27 PM
lol, different people have different ideas of "current".

Assuming you have V8 build 203 and V2 firmware 2.07.35, then did you program the newer BBx config files (the ones that came with 203)...?
paint94979
December 28th, 2012, 05:31 PM
Yes 2.07.35... According to the V8 software Boot Block and Firmware is "OK"
joecar
December 28th, 2012, 06:20 PM
I contacted Tech Support.

In the meantime can you post a screenshot of the Licenses page in V8.
Blacky
December 29th, 2012, 04:04 PM
Can you please send me the latest trace files from your laptop as explained under the heading "Further Support" here:
http://support.efilive.com/kb_article.php?ref=8254-QOGC-9586

Also send the license backup file (*.lbu) that you can generate using the V7 menu option: Help->FlashScan V2 / AutoCal V2 VIN Licensing... -> [Backup].

Send the files to paul@efilive.com with a link to this thread so I know what the files are about.

Regards
Paul
paint94979
December 31st, 2012, 11:52 AM
Can you please send me the latest trace files from your laptop as explained under the heading "Further Support" here:
http://support.efilive.com/kb_article.php?ref=8254-QOGC-9586

Also send the license backup file (*.lbu) that you can generate using the V7 menu option: Help->FlashScan V2 / AutoCal V2 VIN Licensing... -> [Backup].

Send the files to paul@efilive.com with a link to this thread so I know what the files are about.

Regards
Paul

Hey Paul I sent you an email