PDA

View Full Version : FTC Numbers



white2000ta
March 13th, 2006, 12:16 AM
Guys,

I just finished my LS2 402 engine swap. During the process i installed a 2004r transmission. The tranny has a speedo ring, and a wire for the lockup converter and thats it. I havent worked out the speedo, its all over the place!

My real question is how does the PCM know what FTC to use? I think that becuase of the tranny we may not be hitting the right tables. Does anyone have any experience with this? Is there a Fuel Trim Cell chart I can refer to? I have EFILive logging FTC information. :nixweiss: Below is the link to the log file. We are still working on getting the idle trims down.

www.fast-ta.com/engine/ls2long.efi (http://www.fast-ta.com/engine/ls2long.efi)

Thanks for the help

wait4me
March 13th, 2006, 03:05 AM
You can set up your own boundries to make any fuel trim cell table you want.

Do a search in the navigation window for "trim boundry" and it will pop up.

DaddySS
January 7th, 2008, 02:22 PM
Reviving this post - how are the trim cells determined, what combination of inputs controls them?

joecar
January 8th, 2008, 04:19 AM
PCM must be in CL, and then it looks up B3809 and B3810.