PDA

View Full Version : E39 Camaro v6 as a swap transplant?



finiata
February 12th, 2013, 06:42 AM
Is this pcm/ecu as manageable as a swap candidate? Will it work without all the other interfaces from the Camaro? Tune-able? Searched and it seems to be but... Hate to buy it and find I can't make it work.

GMPX
February 12th, 2013, 11:28 AM
Yes, I know of some E39's that are being used as transplants, we have a VATS patch available for it.

finiata
February 21st, 2013, 10:23 AM
Awesome! Thanks for the quick reply, as always.

finiata
December 3rd, 2013, 06:15 AM
Bringing this back so I can be really clear, the V6 Camaro 2010-11, is or is not supported? I don't see it under supported vehicles although I do see a few other 3.6L cars.

Thanks in advance :)

ScarabEpic22
December 3rd, 2013, 06:39 AM
Not supported, E69 or E69-4 ECM. You can scan/log, read/flash, but no calibration mapping is available from EFILive. I.e. tuners use 3rd party tools to develop their tunes/calibrations then use EFILive to read/flash.

finiata
December 3rd, 2013, 07:06 AM
Ouch! Anyone know anything about the differences between the e69/e39 camaro's? Can I swap out the harness/ecu to a 12+, sensor differences? Crankshaft tooth count?

BustedTruck
February 9th, 2014, 09:59 AM
I'm gonna beat a dead horse. Could I remove the theft on a e69 ECM for transplant. I understand it's not supported for tuning, but if I just wanted to remove the theft so I can start the car, is that possible?

GMPX
February 9th, 2014, 10:27 AM
EFILive doesn't know how to disable theft on that ECM, if you find someone that does the best we could offer is you could flash the tune in.