PDA

View Full Version : need help with e85 pid



Big Block
March 2nd, 2013, 07:03 PM
I am using a AEM wideband in serial mode. I need help making a pid to tune my VE table. I have 9.8 afr in b3601 and when I log with ext_wbo2 Ben I get the wrong BEN. Do I need to make a custom calac. pid to dial in my VE? How do I make a custom pid?

joecar
March 2nd, 2013, 11:26 PM
Do you have V1 or V2...?

Which wideband do you have...?

WO2BEN uses serial comms Lambda from the wideband, does your wideband support this...?

Post your calc_pids.txt file here so I can see if it already contains calc pids.

Big Block
March 3rd, 2013, 05:22 AM
I am using a V2. The AEM wideband is the one with te controller built into the gauge don't know the part no. I can view Lambda on the v2 but it won't log serial lambda it only logs serial ext_wbo2. My laptop is at the dyno so I cant post my calc_pids.txt right now