Copying PID selection to FlashScan V2 from EFILive V7.5? And LM-2 wideband

[sac811]

I am attempting to setup my Flashscan to scan for all the things in this thread (Using a serial Wideband Innovate LM-2 Sensor and digital gauge):
http://forum.efilive.com/showthread.php?15236-Calc-VET-correcting-MAF-and-calculating-VE-(in-single-log)

1. I made a PID selection and saved it, but I don't know how to copy it over to the Standalone BBX to make a log. I've done it using V8 but don't know how to do it for the Calc.VET

Any help would be great.

2. Also can I log LM-2 as a serial wideband without actually connecting the gauge to power and a ground, or is it required?

Thanks

Jeremy

[joecar]

Start V8 S&T, goto BBx, on the Scan tab edit/create a pidlist with the pids you want...

on the Scan tab delete any pidlists not for your PCM;
on the Tune tab delete any PCM/ECM/TCM that is not yours;

when done click Save As (to file Options.txt), and click Program All [accessed via downarrow next to Program].

More info: Setting-up-a-FSV2-from-scratch (http://forum.efilive.com/showthread.php?20699-Setting-up-a-FSV2-from-scratch)


As log as the LM-2 controller is powered you should be able to log from it.

[sac811]

my lm2 only came with a connector to the gauge. So will it need the gauge to power up, or will plugging it up to the V2 give it power?

[joecar]

No, it needs to be powered separately.