PDA

View Full Version : Barometric Pressure / Air Density Adjust Tables



BlackCPG
March 13th, 2013, 11:14 AM
While tuning an 07.5, I noticed any changes I made in the base tables or adjust 1-4 tables did nothing.

Looking at the PID's, CM.BARO_B is reading 0.0psi. SAE.BARO, & CM.AAP both read 14.2psi. When the sensor is unplugged, SAE.BARO drops to 6.4psi and CM.AAP drops to 8.8psi.
The engine is running on air density adjust 5 tables. There are no active codes.

Anybody ever had a similar issue?