PDA

View Full Version : RTACS on Main VE and Boost VE at the same time?



BlackGMC
March 23rd, 2013, 09:11 AM
Can you update the Main VE and Boost VE at the same time or do i need to just have one turned on at a time?

The reason i ask, is when i have both enabled the 105 column on the boost VE table updates below 105... Does that make sense?

joecar
March 23rd, 2013, 09:38 AM
I'm not sure, but it seems to mean that you can only have one table active at a time... (I haven't played with my RR sufficiently).

BlackGMC
March 23rd, 2013, 03:41 PM
Well i was able to figure it out. It took awhile. Basically you have to build a custom pID for each table. You also have to build in a MAP check to filter out MAP settings above/below the table boundaries. Once i get back to my laptop i will post up the PIDs if anyone is interested.

joecar
March 25th, 2013, 06:44 AM
I'm interested, please/thanks.

BlackGMC
March 25th, 2013, 06:49 AM
I did a write up on PerformanceTrucks.net

http://www.performancetrucks.net/forums/tuning-diagnostics-electronics-wiring-161/how-ve-tuning-stfts-wideband-efi-live-road-runner-515906/#post5084192