PDA

View Full Version : 1998 calcvet. pid list


bbaird
March 24th, 2013, 10:41 PM
Trying to perform the calc.vet and only a few of the pids are avalible on my pid list. Trying to validate them any.
joecar
March 25th, 2013, 07:09 AM
Post a screenshot.
bbaird
March 26th, 2013, 12:32 PM
When I try to save it to My Documents\EFILive\V7.5\User Configuration It says path does not exits. Check the path and try again. Same message every time I try to save it. Thanks bbaird
joecar
March 27th, 2013, 04:55 AM
Do you have WinXP or Win7/8...?

In the scantool go Edit->Properties->Folders and see what folder path it says for User Configuration.
bbaird
March 27th, 2013, 12:21 PM
I have 2007 windows vista. In properties folder User Confiquration C:Users\XXXXX XXXXX\EFILive\V7.5\User Configuration
Where X's are is my name. Thanks
joecar
April 10th, 2013, 07:55 AM
I have 2007 windows vista. In properties folder User Confiquration C:Users\XXXXX XXXXX\EFILive\V7.5\User Configuration
Where X's are is my name. ThanksCopy the calc_pids.txt file to that folder.
joecar
April 10th, 2013, 07:56 AM
Also, you should be using the calc_pids.txt file containing the pid CALC.B4901.
voda1
July 1st, 2013, 08:25 AM
From post#15236(Calc.VET: correcting MAF and calculating VE) it shows DYNAIRTMP_DMA as required pid but can be replaced by CALC.B4901.

CYLAIR_DMA and DYNCYLAIR_DMA are recommended, are there any CALC pids available to replace those for 97/98 pcm?
joecar
July 1st, 2013, 09:23 AM
From post#15236(Calc.VET: correcting MAF and calculating VE) it shows DYNAIRTMP_DMA as required pid but can be replaced by CALC.B4901.

CYLAIR_DMA and DYNCYLAIR_DMA are recommended, are there any CALC pids available to replace those for 97/98 pcm?Try CALC.CYLAIR.