PDA

View Full Version : Dang flashscan is fast



DebianDog
February 23rd, 2005, 08:17 AM
I saved my tune
Removed the Predator tuning
Made all my changes to the downloaded tunes
Uploaded the new tune with REV limiter, RPM shift, cold and hot idle chages, and shift point changes
Uploaded the tune. IN < 90 seconds!

I was like wow! Something must have not worked right.

Started the car and it went right to the 1200 RPM idle setting (cold) I had set then as it past 110 F it dropped to the 800 RPM setting I had requested.

Ummm Nice choppy idle :twisted:

I assume since I do not have a "performance" option on my car I do not have to worry about those settings right?

GMPX
February 23rd, 2005, 10:35 AM
I saved my tune
Removed the Predator tuning
Made all my changes to the downloaded tunes
Uploaded the new tune with REV limiter, RPM shift, cold and hot idle chages, and shift point changes
Uploaded the tune. IN < 90 seconds!

I was like wow! Something must have not worked right.

Started the car and it went right to the 1200 RPM idle setting (cold) I had set then as it past 110 F it dropped to the 800 RPM setting I had requested.

Ummm Nice choppy idle :twisted:

I assume since I do not have a "performance" option on my car I do not have to worry about those settings right?

Ah, 90 seconds for a reflash is not good, it means it was either bumped back to 1x mode or you didn't have high speed selected.

Reading the PCM should take approx 1:50, programming should be about 30seconds.

Can you please confirm we are talking the same thing here?.

Cheers,
Ross

wait4me
February 23rd, 2005, 11:03 AM
lol,, Calm down there gmpx, He was talking start to finish including the tune modifications lol :)

GMPX
February 23rd, 2005, 11:06 AM
Just finished my first coffee of the day...must have got too excited :lol:

Cheers,
Ross

wait4me
February 23rd, 2005, 11:09 AM
lol, RELAX, Take a deep breath, NOW GET BACK TO WORK!! j/k

DebianDog
February 24th, 2005, 08:42 AM
Yes congrats! I am a happy happy man!

Kudos on the ability to click a graph and CHANGE the data! I was like, "It sure would be nice if.... WHOLLY COW it did change the data"

Nice... nice... job. Looking forward to using the software a LOT more.

Thanks,
Dan