PDA

View Full Version : New 24x and 58x for SBC and 4.3L V6



S10Wildside
April 27th, 2013, 10:39 PM
Here's a sneak peek at what we've been working on for 1987-up SBC and 4.3L V6 engines. Early SBC engines won't accept the timing set, but depeding on demand, we may support the early SBC in this fashion.

Illustrated in this photo with a 1996-up 8 inch Vortec damper.

We are hoping to be in full production by summer 2013.

These kits bring Gen III and Gen IV LS-Series PCMs/ECMs/TCMs and EFILive tuning to small-block Chevy engines.

http://www.eficonnection.com/temp/SBC_coming_soon.png

GMPX
April 28th, 2013, 08:56 AM
Good stuff guys, well done.

nevinsb
April 29th, 2013, 12:30 AM
Sign me up for one. I know the guys at syty will go nuts over this. Is there going to be a plug for the oil pump available? I"m assuming this is so we are going to be able to run LS1 coils on the 0411.

S10Wildside
April 29th, 2013, 12:38 AM
Is there going to be a plug for the oil pump available?
Mallory makes one.
http://www.eficonnection.com/eficonnection/images/OilPumpDrive_SBC_BBC.png


...so we are going to be able to run LS1 coils on the 0411.
Not in a 6 cylinder configuration. There is no supporting GM calibration. We will use the Holley Dominator ECU for 4.3L coil per cylinder ignition.

nevinsb
April 29th, 2013, 01:17 AM
Looks like a nice ECU, I'll have to look into it when I get back from Afghanaland.