PDA

View Full Version : Truck won't run when MAF is disabled for SD tune


kbracing96
May 1st, 2013, 03:01 PM
I got a 03 turbo 6L truck that we are trying to tune 2 bar SD. We set everything with COS3 for SD tune, but as soon as it fails the MAF, the truck dies and will not run. Scratching my head on this one... Anyone wanna take a look at the tune and see if we missed something???
minytrker
May 1st, 2013, 04:57 PM
You need to change P0101, P0102, & P0103 to C: Non Emissions.
kbracing96
May 2nd, 2013, 02:07 AM
I did have them set that way and it still dies as soon as the MAF fails... :(
minytrker
May 2nd, 2013, 02:27 AM
I have had a couple trucks over the years that would not run with the MAF failed. What I did was set the codes to not reported and then zeroed out B5001. The pcm technically thought there was a MAF but with it zeroed out it didnt effect the fueling any. I left C2901-C2910 stock.
ScarabEpic22
May 2nd, 2013, 03:43 AM
I have had a couple trucks over the years that would not run with the MAF failed. What I did was set the codes to not reported and then zeroed out B5001. The pcm technically thought there was a MAF but with it zeroed out it didnt effect the fueling any. I left C2901-C2910 stock.

Interesting to hear, glad you figured out a way around it.