PDA

View Full Version : Shift point change fro 6L90



55chevdelray
May 20th, 2013, 06:40 AM
How do you change the shift point with E38 and T43 (6L90)? I want to raise the shift point.

ScarabEpic22
May 20th, 2013, 07:38 AM
Open up the TCM and edit the Part throttle shift tables...you have to read the ECM and TCM separately.

55chevdelray
May 20th, 2013, 08:01 AM
Open up the TCM and edit the Part throttle shift tables...you have to read the ECM and TCM separately.

I'm not wanting to adjust part throttle, just WOT. I'll look at that table, though.

55chevdelray
May 20th, 2013, 08:43 AM
Open up the TCM and edit the Part throttle shift tables...you have to read the ECM and TCM separately.

Not able to locate the Shift tables.

ScarabEpic22
May 20th, 2013, 12:48 PM
Not able to locate the Shift tables.

Post your TCM tune up.

Trans Calibration->Shift Control->WOT Shift Speeds and/or WOT Shift RPM. All the WOT stuff is there.