80# Deka Injector help. 2006 Corvete.

[rpmspeed]

I've been trying to get this car converted from e85 tuned by another facility back to pump gas, they were using hptuners with a custom OS so had to flash back to stock and stock OS 12614682. Attached is a tune don't mind the spark table and what not i'mn just trying to get injector data in but not having much lucky with these injectors. This OS can only go to 7.9 g/s in the injector flow so was using the multiplier table to try and get to 80#'s.

Car is 2006 Corvette manual
6.2 engine.
slot style maf
Paxton supercharger
Unknown cam
2bar map sensor
full exhaust
fast 102 intake
Deka 80# injectors

if anyone could look at the tune and see what I"m doing wrong or if anyone has information on these injectors that'd be great!! Thanks.

[joecar]

Is the FPR MAP-referenced (IFR should be flat) or un-referenced (IFR should be sloped)...?

[rpmspeed]

Unreferenced

[rpmspeed]

Another question...I have a brand new 2011 E38 PCM for 2011 corvette, which has the tables to scale the injectors right and doesn't max at 7.999. Is it possible to swap it in? I've been trying to research how without locking it up. My theory is do a tis sps reflash in a 2011 corvette with that vin. than put in the 2006 and change the vin to the 2006. Would that work at all?

[rpmspeed]

I figured it out with the original pcm all good now.

[joecar]

What did you do...?