PDA

View Full Version : Km to MPH



55chevdelray
May 21st, 2013, 07:26 AM
I'm noticing that all the table references for speed are Km. Is there a way to change everything in EFI Live to mph references?

Wheelz
May 21st, 2013, 07:51 AM
Under the edit menu, look for something like set default units (it's towards the bottom, like 3rd or 4th from the bottom)b you'll have to have all your table windows closed. Select all and click imperial.

joecar
May 21st, 2013, 09:11 AM
In scantool: on PIDs tab: highlight any speed pids and do rightclick->Imperial.

In tunetool: go Edit->Configure Display Units, for each of the Data, Row, Col columns click once or twice on the column heading, highlight the group of speed items, do rightclick->Data/Row/Col->Imperial.

Dirktdolman
November 25th, 2014, 03:22 PM
Using EFILive 8 I went to F:5 BBX, F:2 Scan, Read, BBL Enabled Controller (I selected LS1B), right clicked on VSS and selected properties, I activated the Custom PID Properties, Clicked on the down arrow in the Quick Select box and selected the MPH option, Clicked OK, Clicked the down arrow next to SAVE and selected Save As, I choose a location and created a file name I could remember then SAVE, next I clicked the down arrow next to Program and selected Program Selections and Configuration Files (slower).

I also did this for all the temp readings to change from C to F

Will this work? IDK yet but I will try it tomorrow.

joecar
November 26th, 2014, 12:33 AM
Yes, that works for setting the custom units for V2 BBL...while logging press ENTER on V2 keypad to show custom units.

Edit: works for V2 LCD during BBL.

Dirktdolman
November 26th, 2014, 04:29 AM
I tried that and it does not change.

joecar
November 26th, 2014, 05:15 AM
I tried that and it does not change.Where, in V7 scantool, V8 scantool, or V2 LCD during BBL...?

Dirktdolman
November 26th, 2014, 12:47 PM
The enter key would not change the screen on the V2. Now that I have activated the Custom PID it works.