Help with bbx

[restless@westnet.com.au]

HI guys
im having trouble with the BBX programing the v2
since i downloaded the latest ver of v8 2.2 and 5.7 10 days ago

i don't seem to be able to reposition the pids on the v2 screen like you used to be able to ,i can add or subtract a pid no worries BUT it seems to just go into any position ( generic ) when you program the v2
tryed slow / fast / reconfig /
i have enclosed a page shot of how i'm trying to get the v2 screen to look
cheers
15154

[joecar]

There is a newer update which should fix that.

Update-May-25-2013 (http://forum.efilive.com/showthread.php?22662-Update-May-25-2013)

Remember to flash V2, then in BBx do Program All.

[restless@westnet.com.au]

hi joe

i have just done that ( down loaded the bouth ver upgrades ) re flashed the USB drivers and the boot block
they are boot block v2.07.04 dec 12 ,2011
firmware is v2.07.42. may .25.2013
drivers are v2.08.28
and reprogrammed the BBX (at least you can reposition the pids on the v2 screen now )

thanks BOB