DBW cam idle tuning. Where do i start?

[hotrod]

I have a 2004 silverado with a 6.0 and Tick Turbo Stage 2 cam. Runing a COS3 operating system 2 bar. Where do i start to make it idle properly. Fisrt time dealing with DBW.

[hotrod]

Ok i figure out idle in park and in gear. Idles good. But when i rev it up in park it has a hard time finding idle and dies. What do i need to adjust to resolve this?

[joecar]

These links may help:


Idle Tuning
showthread.php?4661-Idle-Tuning-Helpful-Info-Inside (http://forum.efilive.com/showthread.php?4661-Idle-Tuning-Helpful-Info-Inside)
showthread.php?14439-Idle-Tips-amp-Tricks (http://forum.efilive.com/showthread.php?14439-Idle-Tips-amp-Tricks)
showthread.php?5866-Auto-VE-questions (http://forum.efilive.com/showthread.php?5866-Auto-VE-questions)
showthread.php?14153-scan-tool-wont-log-rafig-or-rafpn (http://forum.efilive.com/showthread.php?14153-scan-tool-wont-log-rafig-or-rafpn)
showthread.php?14435-Need-help-Can-Start-Car-but-dies-when-I-give-it-any-throttle-before-going-to-CL (http://forum.efilive.com/showthread.php?14435-Need-help-Can-Start-Car-but-dies-when-I-give-it-any-throttle-before-going-to-CL&p=129519&viewfull=1#post129519)
showthread.php?7011-ETC-cars-and-IAC-parameters (http://forum.efilive.com/showthread.php?7011-ETC-cars-and-IAC-parameters&p=61455&viewfull=1#post61455)
showthread.php?14544-Working-on-my-idle-tune (http://forum.efilive.com/showthread.php?14544-Working-on-my-idle-tune)
showthread.php?14794-Help-with-open-loop-%28cold-start%29-tuning (http://forum.efilive.com/showthread.php?14794-Help-with-open-loop-%28cold-start%29-tuning&p=133446#post133446)
showthread.php?149-Idle-%28Transition%29-Tuning (http://forum.efilive.com/showthread.php?149-Idle-%28Transition%29-Tuning)
Stumble-3-seconds-after-cold-start&p=178921#post178921 (http://forum.efilive.com/showthread.php?14144-Stumble-3-seconds-after-cold-start&p=178921#post178921)
Idle-Tips-amp-Tricks:post#46 (http://forum.efilive.com/showthread.php?14439-Idle-Tips-amp-Tricks&p=193144&viewfull=1#post193144)

More Idle Tuning
showthread.php?t=149 (http://forum.efilive.com/showthread.php?t=149)
showthread.php?t=5866 (http://forum.efilive.com/showthread.php?t=5866&highlight=RAFIG)
showthread.php?p=86553 (http://forum.efilive.com/showthread.php?p=86553) post #17
showthread.php?t=2630 (http://forum.efilive.com/showthread.php?t=2630)
showthread.php?t=473 (http://forum.efilive.com/showthread.php?t=473)

Throttle Cracker/Follower
showthread.php?t=3568 (http://forum.efilive.com/showthread.php?t=3568)
showthread.php?t=4081 (http://forum.efilive.com/showthread.php?t=4081)
showthread.php?t=5406 (http://forum.efilive.com/showthread.php?t=5406)
showthread.php?t=5940 (http://forum.efilive.com/showthread.php?t=5940)

[hotrod]

Thank you Joe, ill rear through them.

[BLK02WS6]

For the most part, tuning DBW idle is very much like cable idle - only instead of the tables manipulating the IAC motor, they open the throttle blade. The tables have the same effect though...