View Full Version : Csp5
easymon
July 20th, 2013, 12:38 PM
Hey guy was playing with csp5 building tune when you get to fuel base tables and fuel air density it is in MPa instead of PSI cant copy paste for MPa tops out at 250 so it llat lines all to 250. What all you guys do in this case . Thanks Shannon
KhakiCummins
July 20th, 2013, 01:34 PM
Unless CSP5 is different than normal tuning...
In the menu bar select Edit >> Configure Display Units
Then Select All >> Imperial and then hit OK.
That should set all your tables to Imperial Units
easymon
July 20th, 2013, 01:52 PM
Thanks that did it.
easymon
July 21st, 2013, 01:02 AM
Have another ? i know units should be imperial so why do all my tunes have MPa vers PSI so do i need to go through all my tunes and config units to imperial. Just dont want to have a prob. when loading ecm. Thanks Shannon
Quinton
July 21st, 2013, 02:16 AM
Yes. Select all then imperial
easymon
July 21st, 2013, 02:33 AM
Ok for some reason csp5 was in metric not imperial so change the file i was copy paste metric to match csp5 that caused all my tune to metric thought that was strange.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.