CSP-5 Video walkthrough

[2007 5.9]

Here are some videos I made today to hopefully help you guys go from A-Z in moving, flashing, switching and looging with CSP-5/EDA.

http://s472.photobucket.com/user/2007CTD/media/A766D31E-0A70-43FB-91FF-188AD3B06EED-1030-0000006557940264.mp4.html

http://s472.photobucket.com/user/2007CTD/media/2339CF46-C90A-4106-9D88-A4DC3DAE20AE-1030-00000065D0D9D80B.mp4.html

http://s472.photobucket.com/user/2007CTD/media/B8D2EF0B-6C0C-41A1-9D7B-1CA6E147A5F2-1030-00000066D56765F1.mp4.html

http://s472.photobucket.com/user/2007CTD/media/CD29C06A-285E-4F1C-BB64-61043449F07D-1030-000000674CB0298B.mp4.html

http://s472.photobucket.com/user/2007CTD/media/256A1B01-F982-4B81-BB18-FEC2B8645B23-1030-00000067B2A2E540.mp4.html

http://s472.photobucket.com/user/2007CTD/media/C5124FCF-7317-49C6-9E09-03728614BCC6-1030-000000668259F92F.mp4.html

[GMPX]

Nice one Les, hopefully this helps those who might be a bit lost.

[2007 5.9]

I'm getting emails everyday from those who dont want to read...so visual guidance seemed necessary.

[GMPX]

I'm not much of a 'read the manual' guy myself so I won't rant, but I know what you mean. :doh2:

[cumminsDK]

hey Les,

I figured out my tune naming issue with the names changing, if I go in and select the CMB PID list in the V2 then it comes up with the correct programmed names. However I noticed in your second to last video that you were changing units on the v2 by pressing enter while displaying data. Mine will not do this. I have tried everything I can think of. it will however change to 4 pids displayed (control+enter) and the white background (control+down arrow). Any suggestions?

Thanks in advance,
Trent

[2007 5.9]

hey Les,

I figured out my tune naming issue with the names changing, if I go in and select the CMB PID list in the V2 then it comes up with the correct programmed names. However I noticed in your second to last video that you were changing units on the v2 by pressing enter while displaying data. Mine will not do this. I have tried everything I can think of. it will however change to 4 pids displayed (control+enter) and the white background (control+down arrow). Any suggestions?

Thanks in advance,
Trent

You have to change the units in the bbl section in v8...then reprogram the v2


Sent from my iPhone using Tapatalk 2

[cumminsDK]

Ok got the units changing had to go into each pid and in properties activate custom units the select the imperial unit I wanted to see, but now all units converted from kpa to psi read zero when displaying psi. They work as before when I hit enter and they are displayed in kpa. Sorry to be a nuisance but this is my first adventure into BBX. I do feel like I've come a long way in the last twelve days as I have been able to read, flash, log, and switch tunes with the v2 its just the units thing kicking my butt!

[2007 5.9]

After you changed the units, did you save and reprogram the v2?


Sent from my iPhone using Tapatalk 2

[cumminsDK]

I believe so I've done it so many times I can't be sure but if I hadn't the units wouldn't be changing when I hit enter I'm thinking??

[2007 5.9]

Corrxt


Sent from my iPhone using Tapatalk 2

[cumminsDK]

Okay after looking at a few more parameters all of the PID's that I activated custom units for are not working properly ECT shows 32°F for example and rail pressure is showing three PSI driving down the road at operating temp ill check and see what I screwed up

[cumminsDK]

I had went v8 and under edit>properties>general and under the conversions tab I had checked the invert box for the pids I was trying to get to display imperial on the v2 so it checked the box automatically under properties in each pid I activated custom units for������������

[cumminsDK]

All is working the way I needed it to, I feel like a pro not carrying the laptop out to each truck now! Thanks for your help Les!

Trent