licensed controller says it not??

[6772king]

i licenced a controller for a 2004 and 9044 os ,,, changed to a 6006 os and tryed to make a change and now efi says controller not licensed with a $0534 message?? any ideas what i did,,, pritty sure i didnt lock it

[cindy@efilive]

From the Error Code list

$0534 Invalid Serial Number.

An attempt was made to program and license a controller that had a corrupt serial number.

It is possible for the serial number to appear corrupt due to a data transfer failure. Retry the operation a few times, if the error continues to occur then the serial number probably is corrupt. In that case, use the EFILive Tuning Tool software to full-flash the controller to restore the serial number.


What serial number appears?

Cheers
Cindy

[6772king]

tried it a couple more time and it says the same thing ,,, the number it says is 3280ct09bcp1

[cindy@efilive]

I've escalated your issue to support.

Cheers
Cindy

[Blacky]

Make sure you are using the latest EFILive software, available here:
http://forum.efilive.com/showthread.php?23025-Update-Aug-06-2013

Then if the problem still occurs, please locate the appropriate trace files as per the instructions here:
http://support.efilive.com/kb_article.php?ref=8254-QOGC-9586

Send the trace files to me at paul@efilive.com

Regards
Paul

[6772king]

that did it guys ,,,thanks a bunch!