PDA

View Full Version : TCC Duty Cycle



daveb
April 6th, 2006, 09:38 AM
In HP there is a TCC Duty Cycle parameter.

I cannot see the equivalent in EFI, does anyone know where this is?


Thanks

DAVE

joecar
April 6th, 2006, 11:05 AM
GM.TCCDC

On PIDs tab in the scan tool, click the "System" heading (sorts by this) and scroll down until you see "Transmission" under this heading, and there it is.

:cheers:

daveb
April 6th, 2006, 11:12 AM
Thanks, but do you know how to adjust it in the tune tool?

joecar
April 6th, 2006, 11:55 AM
Thanks, but do you know how to adjust it in the tune tool? I don't think there an adjustment [yet]; the PCM ramps it up to 96+%;
anything less than 96+% will allow the TCC to slip and burn.

GMPX
April 6th, 2006, 12:48 PM
Is this what you guys are talking about?
http://forum.efilive.com/showthread.php?t=2243

Cheers,
Ross

daveb
April 6th, 2006, 01:13 PM
I hope so, looks promising.

joecar
April 6th, 2006, 06:39 PM
This means we'll be able to control the ramp up and ramp down rates...

http://img463.imageshack.us/img463/9037/tccmode1qu.png