PDA

View Full Version : No Shift Locked TCC file?


IJ.
August 28th, 2013, 04:32 PM
Been trying to sort this one for quite awhile now, can't seem to crack it.

I want to be able to plonk the shifter in 3rd have it shift 1>2>3 at low speed then lock up the TCC for the dyno.
(DVT is a bit problematic with my Laptop so not an option)

Thanks guys!
(did ask in the Gen4 section but this gets more Guru Traffic)
EagleMark
August 29th, 2013, 06:00 AM
I want to be able to plonk the shifter in 3rd have it shit 1>2>3 at low speed then lock up the TCC for the dyno.Most guys don't want the transmission to take a shit ever? But if that's what you really want I'm sure we could figure out how to? :anitoof:

Can't help with what you really want though... :nixweiss:
IJ.
August 29th, 2013, 01:08 PM
Most guys don't want the transmission to take a shit ever? But if that's what you really want I'm sure we could figure out how to? :anitoof:

Can't help with what you really want though... :nixweiss:
LMAO missed that :D