CALC.VE Question

[picnic_george]

I'm sure this has been covered 100 times but I can't see to find the answer. On the tutorial it says to log all these pids.

http://download.efilive.com/Tutorials/PDF/Calc.VE%20Tuning%20Tutorial.pdf

http://i35.photobucket.com/albums/d159/Kriznips/PIDS_zps268634d1.png (http://s35.photobucket.com/user/Kriznips/media/PIDS_zps268634d1.png.html)
On page 3 it gives a list of PIDS but on page 4 it shows the PID selection and it shows PIDs lile

http://i35.photobucket.com/albums/d159/Kriznips/PIDS2_zpsafb8dbf9.png (http://s35.photobucket.com/user/Kriznips/media/PIDS2_zpsafb8dbf9.png.html)

GM.EST_ACB
GM.ECSFAIL
GM.FANTYPE
ETC ETC

But max PIDS are 24 if I add all the PIDS for spark, tests calibrations or whatever it will put me way over 24. Do I need to log all that or just the ones on page 3?

Thanks
Kris

[joecar]

Discard the pdf (it is out of date) and instead please use post #1 of the Calc.VET thread (it gets corrected/updated occasionally):

Calc-VET-correcting-MAF-and-calculating-VE-(in-single-log) (http://forum.efilive.com/showthread.php?15236-Calc-VET-correcting-MAF-and-calculating-VE-(in-single-log))

[picnic_george]

The tutorial should be updated, they make life easy :)

Thanks Joe

[joecar]

You you're correct... I'll organize myself and get it going (with updated pics, and pid/map/dash files).

[picnic_george]

You're the best Joe, I tried this a while ago but didn't have any luck on my 98. I'm going to attempt it again on my tahoe for fun.

[ACCLR8N]

You you're correct... I'll organize myself and get it going (with updated pics, and pid/map/dash files).

That's crazy talk

[joecar]

That's crazy talklol... it is ambitious.