PLX 300 question

[driver456]

Where exactly does the white & grey wires go into the flash scan box? I know there are the orange plugs,just need to know which letter they go in,A,B,C,D or E

[SinisterSS]

The orange plugs have letters on them.

On the 3-wire plug, pin-out D is the common ground and pin-out E is the EXT.AD1 input (wideband voltage)

[purrvert]

If I remember correctly, Red is a switched +12vdc supply, Black is ground, Gray is narrowband simulation, White is wideband. They may switch colors on different production runs.
There is a three prong orange plug, center pin is ground, pin next to the two pin slot is AD2, then ground, then AD1.
Below is how I have mine.
There is a section in the scan manual with pictures pg 103.

[driver456]

Thank you.....................Paul