View Full Version : Looking for 03-05 4.8/5.3 tune
knightracer_08
October 7th, 2013, 05:09 PM
I am looking for a factory tune for an 03-05, I just need a base to revert my 06 to so I can start with to build a turbo tune, if someone already has a good turbo tune I would be much appreciative to get one as well. I have an 06 silverado, 4.8, 5 speed, custom built forward mount turbo, 2 bar map and 56# injectors if that helps any. thanks.
Lextech
October 7th, 2013, 11:33 PM
I have a 2004, 4.8, 5sp, DBW stock calibration. If you use it---The first thing I would do is make sure the DBW works. Just to make sure the 04 tune is compatible with the 06 DBW components.
Jeff
Taz
October 8th, 2013, 12:35 AM
... Just to make sure the 04 tune is compatible with the 06 DBW components ...
Hi Jeff ... good thought process ... these are not compatible.
With Sierra / Silverado .... 2003 to 2005 used "common" DBW components and PCM calibrations ... 2006 & 2007 are also "common" to each other ... however these two groups are not cross compatible.
Cheers,
Taz
Lextech
October 8th, 2013, 01:19 AM
Hi Jeff ... good thought process ... these are not compatible.
Hhmmm, I didn't think they were but, wasn't sure. He asked for an 03-05 and the 04 that I have seemed to be the closest to his setup.
Thanks Taz.
Jeff
Taz
October 8th, 2013, 01:30 AM
I'm not sure what the exact intent is either ... in the original post it mentions looking for an 03-05, but also mentions reverting an '06.
Your 2004 tune would work with the 2003-2005 (with some changes), but would not work with a 2006.
knightracer_08
October 8th, 2013, 02:16 AM
Yes, in order to put a cos into an 06 you need to swap the accelerator pedal, wires and tac module to an 03-05 then download the older program. I got this info from black bear performance who contacted me after emailing efi live with my issue.
Taz
October 8th, 2013, 03:33 AM
The Devil is in the small details ............
knightracer_08
October 8th, 2013, 04:35 AM
Thanks for that tune Jeff, can anyone tell me where to start or how to tune in larger injectors? Going from stock to 56 pound. Thanks, Eldon.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.